爱看电影,爱做梦

How to determine LED name from “get led”

“get led” lists ID numbers. This KB will cross reference the ID number with the LED name.

For example, here is a sample output:

nsisg2000-> get led
Application function installed (37c8b4)
flash_delay = 100 ms
id 0: color 0, to flash 0, state 0, flash color 0, new 0, toggle color 0
id 1: color 3, to flash 0, state 0, flash color 0, new 3, toggle color 0
id 2: color 1, to flash 0, state 0, flash color 0, new 1, toggle color 0
id 3: color 0, to flash 0, state 0, flash color 0, new 0, toggle color 0
id 4: color 1, to flash 0, state 0, flash color 0, new 1, toggle color 0
id 5: color 0, to flash 0, state 0, flash color 0, new 0, toggle color 0
id 6: color 0, to flash 0, state 0, flash color 0, new 0, toggle color 0
id 7: color 0, to flash 0, state 0, flash color 0, new 0, toggle color 0
id 8: color 0, to flash 0, state 0, flash color 0, new 0, toggle color 0
id 9: color 1, to flash 0, state 0, flash color 0, new 1, toggle color 0

vpn = TRUE mgmt = FALSE (648259388-0)
nsisg2000->

The ID numbers  correlate to the following LED names:

id 0 – Power
id 1 – Alarm
id 2 – Temperature
id 3 – Status
id 4 – FAN
id 5 – Flash
id 6 – HA
id 7 – Security module 1
id 8 – Security module 2
id 9 – Security module 3

The LED color codes are as follows:
color 0 – no color
color 1 – green
color 2 – amber/yellow
color 3 – red
 

Troubleshooting