正常状态
我们观察下日志 看看这个过程中都发生了什么事情…
root@SRX650-A> show log jsrpd
Jul 6 16:49:16 SRX650-A clear-log[9208]: logfile cleared
Jul 6 16:49:34 Interface ge-15/0/9 is going down
Jul 6 16:49:34 ge-15/0/9 interface monitored by RG-1 changed state from Up to Down
Jul 6 16:49:34 intf failed, computed-weight -127
Jul 6 16:49:34 LED color changed from : Green to Amber, reason Monitored objects are down
Jul 6 16:49:34 Current threshold for rg-1 is 128. Failures: interface-monitoring
Jul 6 16:49:42 Interface ge-15/0/8 is going down
Jul 6 16:49:42 ge-15/0/8 interface monitored by RG-1 changed state from Up to Down
Jul 6 16:49:42 intf failed, computed-weight -255
Jul 6 16:49:42 Current threshold for rg-1 is 0. Setting priority to 0. Failures: interface-monitoring
Jul 6 16:49:42 RG-1 PRIMARY->SECONDARY_HOLD since other node has higher priority of 50
Jul 6 16:49:42 Successfully sent an snmp-trap due to a failover from primary to secondary-hold on RG-1 on cluster 7 node 1. Reason: Monitor failed: IF
Jul 6 16:49:42 updated rg_info for RG-1 with failover-cnt 4 state: secondary-hold into ssam. Result = success, error: 0
Jul 6 16:49:42 Successfully sent an snmp-trap due to a failover from primary to secondary-hold on RG-1 on cluster 7 node 1. Reason: Monitor failed: IF
Jul 6 16:49:42 Changing the primary’ship of RG-1 from node1 to node0
Jul 6 16:49:42 reth1 ifd state changed from node1-primary -> node0-primary for RG-1
Jul 6 16:49:42 updating primary-node as node0 for RG-1 into ssam. Previous primary was node1. Result = success, 0
Jul 6 16:49:42 sending GARPs for reths attached to RG-1
Jul 6 16:49:42 Sending GARP for reth1.0 with MAC address: 00:10:db:ff:70:01 succeeded
Jul 6 16:49:42 printing fpc_num h1
Jul 6 16:49:42 jsrpd_ifd_msg_handler: Interface reth1 is up
Jul 6 16:49:43 SECONDARY_HOLD->SECONDARY due to back to back failover timer expiry for RG-1
Jul 6 16:49:43 Successfully sent an snmp-trap due to a failover from secondary-hold to secondary on RG-1 on cluster 7 node 1. Reason: Back to back failover interval expired
Jul 6 16:49:43 updated rg_info for RG-1 with failover-cnt 4 state: secondary into ssam. Result = success, error: 0
Jul 6 16:49:43 Successfully sent an snmp-trap due to a failover from secondary-hold to secondary on RG-1 on cluster 7 node 1. Reason: Back to back failover interval expired
Jul 6 16:49:43 sending GARPs for reths attached to RG-1
Jul 6 16:49:43 Sending GARP for reth1.0 with MAC address: 00:10:db:ff:70:01 succeeded
Jul 6 16:49:44 sending GARPs for reths attached to RG-1
Jul 6 16:49:44 Sending GARP for reth1.0 with MAC address: 00:10:db:ff:70:01 succeeded
Jul 6 16:49:45 sending GARPs for reths attached to RG-1
Jul 6 16:49:45 Sending GARP for reth1.0 with MAC address: 00:10:db:ff:70:01 succeeded
{primary:node1}
切换后
转载请注明:Kermit的网站 » SRX JSRP 切换试验.1